车载冷喷划线机 CZ-406
发布时间 2009-08-26 16:18:57
产品描述
该机为高压力等流量型，无气喷涂机，利用汽油机驱动柱塞泵，使涂料形成高压，喷涂标线厚薄均匀边角齐，线条清晰美观，喷枪架为导向杆设计，调整线宽准确，方便，配电脑控制器，可根据工程要求调节虚线间距。
This machine is the high-pressure and equal flow-airless spray
engine,it utillzes gasoline engine to drive plunger pump to force
dope form high pressure,the sprayed index marks are common in
thickness and angles,the lines are clear,because of the direction
bar in the spraying gun,the line can be adjusted into certain width
correcting and conveniently,equipped with the computer line
controller,the space between dotted lines can be
changed according to the projet requirements.
技术参数 <Technical parameter>
1.动力<Power>:13 HP HONDA
汽油发动机<13HP HONDA
gasonline engine>
2.**大负载输出流量<The maximum load output
flow>:18L/min
3.**大输出涂料压力<The highest output dope
pressure>:3000PSI （21Mpa）
4.正常工作压力<The normal work
pressure>:10-18Mpa
5.喷副宽度<Width of the
spray>:100-300mm单枪<single gun>
6.喷涂厚度<Thickness of the
spray>:0.2-0.4mm
7.可同时喷双枪<The two guns can be used at
the same time>
8.体积<Volume>:1300*1300*1200mm
9.净重<Net
weight>:600kg
联系人：姜静静 15837141487
河南友联交通设施有限公司
进入店铺
在线留言
| 联系人 | 姜静静 |
|---|---|
| 联系电话 | 0371-69162801 15837141487 |
| 地址 | 河南省郑州市管城区航海东路豫英街3号 |
| 邮箱 | youliansheshi@163.com |