美丽佳品牌 美丽佳外墙找平腻子 精品**腻子
发布时间 2020-10-02 09:12:19
产品描述
| 保质期 | 12 个月 |
|---|---|
| 单件净重 | 20kg |
| 颜色 | 白色 |
WP117外墙找平腻子
主要成份：石英砂、白水泥和进口添加剂。
消耗量：理论上2公斤外墙找平腻子可以批刮1平方米（两遍）实际用量因施工方法，墙面平整度的不同而不同。
搅拌：水的加入量以施工稠度为准，搅拌均匀后，放置10分钟，再进行搅拌即可使用。不可以加入其他材料混合使用。
基层处理：基层坚实无浮灰和污物，墙体表面含水率低于5%。如果墙面平滑或疏松，需进行表面处理，待干净后方可批刮。
批刮找平：腻子找平应在半干状态下（用手轻压不变形）完成，固化后可用砂布找平。批刮腻子厚度大于0.5mm（夏季），腻子批刮厚度超过2mm应分次批刮，每次批刮过厚易出现干缩开裂。
执行标准：技术标准：JG/T157-2009《建筑外墙用腻子》：
施工温度：施工环境温度5度以上，固化过程温度不低于0度。
贮存和运输：存放阴凉干燥处，保质期12个月，产品无毒不燃，贮存运输可按（非危险品规则）办理。
Main components: quartz sand, white cement and imported additives.
Consumption: 2 kg wall leveling putty can be scraped 1 square meters (two times) in theory,the actual Consumption varies due to construction method and roughness of the wall.
Mixing: the quantity of adding water in order to the construction consistency for quasi, after mixing evenly, set aside for 10 minutes, then stir can be used. Can not be mixed with other materials to use.
Base treatment: the base solid free from dust and dirt, moisture content of the wall surface lower than 5%. If the wall surface is smooth or loose, need to carry out surface treatment, to be clean before scraping.
Scraping and leveling: putty leveling should be Completed in semi dry state (pressure is not deformed), level used emery cloth after curing. Putty scraping thickness greater than 0.5mm (summer), if more than 2mm should be graded scraping, it is easy to appear dry shrinkage and crack after each batch scrape too thick.
Executive standard: technical standards: JG/T157-2009 "putty for exterior wall":
Construction temperature: the construction environment should be above 5 ℃ , the temperature of curing process can not less than 0℃.
Storage and transport: stored in the cool and dry place, shelf life is 12 months, the product non-toxic non flammable, storage and transportation can be handled as (non dangerous goods rules) .
第二代 新型环保外墙找平腻子
主要成份：石英砂、白水泥和进口添加剂。
消耗量：理论上2公斤外墙找平腻子可以批刮1平方米（两遍）实际用量因施工方法，墙面平整度的不同而不同。
搅拌：水的加入量以施工稠度为准，搅拌均匀后，放置10分钟，再进行搅拌即可使用。不可以加入其他材料混合使用。
基层处理：基层坚实无浮灰和污物，墙体表面含水率低于5%。如果墙面平滑或疏松，需进行表面处理，待干净后方可批刮。
批刮找平：腻子找平应在半干状态下（用手轻压不变形）完成，固化后可用砂布找平。批刮腻子厚度大于0.5mm（夏季），腻子批刮厚度超过2mm应分次批刮，每次批刮过厚易出现干缩开裂。
执行标准：技术标准：JG/T157-2009《建筑外墙用腻子》：
施工温度：施工环境温度5度以上，固化过程温度不低于0度。
贮存和运输：存放阴凉干燥处，保质期12个月，产品无毒不燃，贮存运输可按（非危险品规则）办理。
Main components: quartz sand, white cement and imported additives.
Consumption: 2 kg wall leveling putty can be scraped 1 square meters (two times) in theory,the actual Consumption varies due to construction method and roughness of the wall.
Mixing: the quantity of adding water in order to the construction consistency for quasi, after mixing evenly, set aside for 10 minutes, then stir can be used. Can not be mixed with other materials to use.
Base treatment: the base solid free from dust and dirt, moisture content of the wall surface lower than 5%. If the wall surface is smooth or loose, need to carry out surface treatment, to be clean before scraping.
Scraping and leveling: putty leveling should be Completed in semi dry state (pressure is not deformed), level used emery cloth after curing. Putty scraping thickness greater than 0.5mm (summer), if more than 2mm should be graded scraping, it is easy to appear dry shrinkage and crack after each batch scrape too thick.
Executive standard: technical standards: JG/T157-2009 "putty for exterior wall":
Construction temperature: the construction environment should be above 5 ℃ , the temperature of curing process can not less than 0℃.
Storage and transport: stored in the cool and dry place, shelf life is 12 months, the product non-toxic non flammable, storage and transportation can be handled as (non dangerous goods rules) .