ST03—双组份涂胶机

ST03—双组份涂胶机 
ST03 The polysulphind Sealant Extruders
技术参数；
采用标准桶200L基本胶20L固化剂
混合比（Ratio range）;7：1—14：1
气压（Air pressure ）:0.6─0.8mpa
电源功率（PowerSupply）;3p 380v 50HZ 4KW
密封胶种类(Key Materials):
    硅酮结构胶(silicones)
    聚硫胶(polysulfides)
    聚氨脂胶(polyurethanes)
性能特点：
1、出胶连续稳定，换向平稳可靠；
2、出胶量大，打胶压力高，出胶量调节方便；
3、比例调节方便；
4、胶枪混合均匀，胶枪轻，操作方便；
5、设备维护方便；
6、胶泵无需另加润滑剂，可保证密封件工况良好，延长使用寿命；
7、使用安全可靠，压力超出使用范围，自动泄荷。
Characteristics:
1、   Extruder surging is continuous and steady and direction can be changed stably
2、   The quantity of extruder surging is large .The pressuer is high .it is very convenient
Toadjust the quantity of extruder surging .
3、   It is convenient to adjust ratio.
4、   The glue gun coats the mixed material on the working surface uniformly .
It is light and easy handing
5、   The faculity maintenance is easy .
6、   The sealing elements can run well and increase of service life without exter lubrient added into the pump.
7、   The operation is safe .it discharges automatically when it goes beyond the normal pressure .

了解更多