贵阳彩钢板铁皮房筠尚长条扣板pvc外墙挂板
发布时间 2021-04-08 12:04:54
产品描述
| 材质 | 聚氯乙烯 |
|---|---|
| 产品类别 | pvc外墙挂板 |
| 形状 | 长条 |
| 等级 | 一等品 |
| 规格 | 4*24 |
| 抗弯强度 | 456 |
| 抗压强度 | 415 |
| 形态 | 片 |
贵阳花溪中铁项目彩钢板筠尚长条扣板pvc外墙挂板装饰旧厂房改造
1、板型：pvc外墙双片式挂板
2、规格
1)长宽：4000mm*240mm
2)板厚：1.25mm±0.03mm
3)长度：标准板长为4m，可按客户要求定尺4m至12m等。
1, plate type: PVC wall double - chip hanging board
2, specification
1) length and width: 4000mm*240mm
2) plate thickness: 1.25mm 0.03mm
3) length: the length of the standard plate is 4m, which can be fixed as 4m to 12m according to customer requirem
1, nails
Stainless steel nails (steel nails, self-tapping screws, expansion screws) should be selected according to the hardness of the wall material, and high quality expansion bolts (plastic expansion tubes and stainless steel screws) should be used for hanging plate fixation, and the temperature should be -40c0 to 70C0.16. The nail cap with a diameter of about 8mm, nail rod diameter of about 3-4mm, nail length of about 25-40mm, the whole expansion bolt into the wall shall not be less than 25mm.
2. Performance table of individual components. Drawing force and design value of external wall panel fixer (safety factor of drawing force: 3.0)
Average drawing force of all kinds of wall design
Reinforced concrete (C25) 0.20kn 0.60kn
Sintered solid brick 0.20kn 0.60kn
Porous brick wall 0.15KN 0.45 KN
Concrete hollow block 0.15KN 0.45 KN
安装筠尚牌pvc外墙装饰挂板应根据墙面材质硬度选用不锈钢钉子（钢钉、自攻螺丝、膨胀螺钉），挂板固定采用优质膨胀螺栓（塑料膨胀管和不锈钢螺钉），适应温度为-40C0至70C0。钉帽约φ8mm，钉杆直径约φ3-4mm，钉长约25-40mm，整个膨胀螺栓深入墙内不得小于25mm。
2、单个构件性能表表.外墙挂板固定件的拉拔力及设计值 （拉拔力安全系数取3.0）
|
各类墙体 |
设计拉拔力 |
平均拉拔力 |
|
钢筋混凝土（C25） |
0.20KN |
0.60 KN |
|
烧结实心砖 |
0.20KN |
0.60 KN |
|
多孔砖墙体 |
0.15KN |
0.45 KN |
|
混凝土空心砖块 |
0.15KN |
0.45 KN |
有时为了调节糊的黏度,便于加工,多摻混两种不同糊黏度的树
脂。在涂覆法中,有时也将乳液树脂和悬浮树脂混合使用。
(13)壁纸壁纸生产过程中更多地采用乳液法树脂,在一些
底层或部分配方中也采用悬浮法聚氯乙烯树脂,一般使用SG-3
型、SG5型树脂
(14)地板材料地面材料具有弹性好、脚感舒适、耐磨损
易清洗等特点。配方设计时,聚氯乙烯树脂一般选用SG-3型、
SG-5型树脂,性能适中,成型加工容易。5分
公部图意高的
2.4聚乙烯树脂特殊品种高聚合度聚氯乙烯树脂
高高聚合度聚氯乙烯(简称HP-PVO)是指平均聚合度在1700
(K≥80)以上的聚氯乙烯树脂。 HP-PVC的牌号按照平均聚合度
分为2000、2500、3000、3500、4000和8000等几种,以平均聚合
度为2500的**为常用。
高聚合度聚氯乙烯树脂包括采用悬浮法生产的HP-PVC树脂
和采用乳液法或微悬浮法生产的 HP-PVC糊树脂两种。目前工业
品中悬浮法HP-PVC居多。的
5 HP-PVC树脂除了保持普通聚氯乙烯树脂的特性外,还具有强度高、回弹性好、压缩水久形变小、耐热、耐寒、耐老化、耐
劳、耐磨、变性小等优点,且对制品有一定消光作用。
Sometimes in order to adjust paste viscosity, for processing, more than mixing two different paste viscosity of the tree
Fat.In the coating process, emulsion resin and suspension resin are sometimes mixed.
(13) the production process of wallpaper wallpaper more emulsion method resin, in some
Suspension PVC resin is also used in the bottom or part of the formulation, and sg-3 is generally used
Type a, SG5 resin
(14) floor materials floor materials have good elasticity, comfortable feet, wear resistance
Easy cleaning and other features.When formula design, polyvinyl chloride resin is generally selected sg-3 type,
SG-5 resin, moderate performance, easy molding.5 points
The public figure is high
2.4 special varieties of polyethylene resin
High polymerization degree polyvinyl chloride resin
米黄pvc外墙装饰挂板中铁厂房政府工程 4*24
中国铁建项目部外墙装修pvc外墙挂板塑 4*24
黔南都匀pvc外墙装饰挂板工厂直销 4*24
米黄中铁厂房政府工程厂房景观房外墙装饰 4*24
米黄pvc外墙挂板塑料扣板中铁厂房政府 4*24
米黄中铁厂房市政工程广州增城yvnshang 4*24