PIO-16/16L(CB)H is a PC Card Standard
compliant CardBus TYPE II size PC Card for input/output of digital
signals. PIO-16/16L(CB)H can input and output digital signals at 12
to 24 VDC and can input and output up to 16 channels. With the
Windows version, the Linux version driver (API-PAC(W32)). The
signal assignment for the connector is compatible with the
PIO-16/16L(PCI)H, PIO-16/16L(PCI), and PIO-16/16L(PM).
Certification
CE
Environmental
RoHS Directive
Features
- The PC card slot side (PC) and the I/O
interface are isolated from each other by an opto-coupler, offering
good noise immunity. The response time has been improved to 200?sec
or better.
- A different external power supply can be used
for each common pin as it is shared by 16 channels.
- You can use all of the input signals as
interrupt inputs. You can also select the interrupt trigger edge of
the input signal.
- The board has a digital filter feature to
prevent noise or chatter from causing erroneous inputs.
- Up to 35VDC, 100mA per signal, max. output.
Zener diode connected to output transistors for protection from
surge voltage. Overcurrent protective device provided for every
eight channels of output transistors.
- *: If your PC has a stack of two TYPE II PC
Card slots, two PC Cards cannot be used simultaneously in both
slots. The PC Card can be used along with another PC Card which
does not use any external connector, such as a memory
card.
Specification
Digital I/O
Bidirection
Response speed
200?sec(max.)
Operation
voltage
Input: 12--24VDC
Operation
voltage
Output: 12--24VDC
Built-in power
supply
Input circuit
Opto-isolated input (Sink output)
Output circuit
Opto-isolated open collector output (Sink
type)
Options
Product Code |
Product |
ACX-PAC(W32)
Ver.5.0 |
ActiveX components sets for measurement system
development |
API-DIO(98/PC) |
Windows版数字量I/O驱动程序 |
API-DIO(LNX) |
Linux版数字量I/O驱动程序 |
CM-32(PC)E |
Signal monitor Accessory for Digital I/O
(Checkmate) |
CN5-D37M |
37pin D-SUB (Female) Connector Five-piece
Set |
DIO-1616LX-USB |
USB隔离型数字量I/O单元 |
EPD-37 |
Screw Terminal (M3.5 x 37) |
EPD-37A |
Screw Terminal (M3 x 37) |
PCA37P-1.5 |
37pin D-type(M) to Open-Ended, Flat
Cable(1.5m) |
PCA37P-3 |
37pin D-type(M) to Open-Ended, Flat
Cable(3m) |
PCA37P-5 |
37pin D-type(M) to Open-Ended, Flat
Cable(5m) |
PCA37PS-0.5P |
A one end connector shield cable for 37 pin
D-SUB connectors with(Mold type, 0.5m) |
PCA37PS-1.5P |
A one end connector shield cable for 37 pin
D-SUB connectors with(Mold type, 1.5m) |
PCA37PS-3P |
A one end connector shield cable for 37 pin
D-SUB connectors with(Mold type, 3m) |
PCA37PS-5P |
A one end connector shield cable for 37 pin
D-SUB connectors with(Mold type, 5m) |
PCB37P-1.5 |
37pin D-type(M) at Each End, Flat
Cable(1.5m) |
PCB37P-3 |
37pin D-type(M) at Each End, Flat
Cable(3m) |
PCB37P-5 |
37pin D-type(M) at Each End, Flat
Cable(5m) |
PCB37PS-0.5P |
37pin D-type(M) at Each End, Shield
Cable(0.5m) Low Cost |
PCB37PS-1.5P |
37pin D-type(M) at Each End, Shield
Cable(1.5m) Low Cost |
PCB37PS-3P |
37pin D-type(M) at Each End, Shield Cable(3m)
Low Cost |
PCB37PS-5P |
37pin D-type(M) at Each End, Shield Cable(5m)
Low Cost |
VI-DAQ |
LabVIEW用数据采集VI程序库 |
|