施克SICK光纤放大器WLL170-2N132

 

WLL170红色LED发射器，适合标准应用场合
手动灵敏度调校
简单的安装和对准
机架兼备发送器和接受器。

两条纤维光缆，适用扫描或光束透过原理

SICK WLL170-2N132 Overview

Photoelectric fiber optic switch WLL170-2N132

SICK WLL170-2N132 Description

• Sender LED red for standard applications
• Manual sensitivity setting
• Simple installation and alignment

 

Product features
Sensing range min ... max (through-beam system):	0 ... 4,000 mm
Fibre-optic cable (through-beam system):	LL3-TB02 and tip adapter LL3-TA01
Sensing range min ... max (proximity system):	0 ... 160 mm
Fibre-optic cable (proximity system):	LL3-DK06
Adjustment:	Potentiometer, 10 revolutions
Light source:	LED
Type of light:	Red light
Wave length:	660 nm
Light spot diameter:	depending on the scanning range
Technical data
Design:	cuboid
Dimensions (W x H x D):	10.5 x 35.5 x 79.9 mm
Angle of dispersion:	ca. 65 °
Supply voltage min ... max:	DC 10 ... 30 V
Ripple:	10 %
Power consumption:	<= 30 mA
Switching output:	NPN: open collector: Q
Switching mode:	Light-/dark-switching, switchable
Output current max.:	<= 100 mA
Response time:	<= 0.25 ms
Switching frequency:	2,000 Hz
Time delay:	40 ms fix, selectable by sliding switch
Time type:	Off delay tOFF
Connection type:	cable, 2 m
Cable material:	PVC
Cable diameter:	O 3.8 mm
Number of cores:	3
Conductor cross section:	0.2 mm2
Circuit protection:	Vs connections reverse-polarity protected / In-/outputs short-circuit protected / Interference suppression / Outputs overcurrent and short-circuit protected
Enclosure rating:	IP 66
Ambient operation temperature, min ... max:	-25 °C ... +55 °C
Ambient storage temperature, min ... max:	-40 °C ... +70 °C
Weight:	ca. 70 g
Front screen heating:	-
Polarisation filter:	-
Housing material:	ABS/PC

 

了解更多