精密型矫直机
发布时间 2012-03-19 08:14:52
产品描述
SNL/STL 薄材精密型矫直机（单段式/双段式）
PRECISION STRAIGHTENER
特点 Speacial Features
两段式矫平，卷料矫平过程中（头端------尾端）中途不须作矫平之调整，可确保一致相同之平坦度。
Two sections type straightening device,it is no need to adjust straighten function when rolled material is under straightening process(form start to end).To ensure the material at same flatness completely.
卷料未经矫平消除应力是无法生产出良好之冲件，唯有将卷料矫平，消除应力才能达成
Fine electric parts can not be finished with high accuracy unless straightened coil materials may achieve. So thin material need to be straightened, and the stress be moderately remoed.
经过本机矫平后，可将材料修正成向下向上弯曲或平坦。
After being Straighten ,materials can be curled upward or downward of flat easily .
传动装置由变频器（循环控制），可与冲床速度同步，平稳的送料。
As bearings of work-rolls are,of a oiling, lubricating free type, there will be no trouble from the abherence of oil or dirt.
可配合任何送料机使用。
Campatible with other feeders.
|
型式Model |
SNL-100 |
SNL-200 |
SNL-300 |
STL-100 |
STL-200 |
STL-300 |
|||
|
**大料宽Max Material Width(mm) |
100 |
200 |
300 |
100 |
200 |
300 |
|||
|
材料厚度 Material Thickness(mm) |
0.1～0.6 |
||||||||
|
送料速度Speed(M/Min) |
6～22 |
||||||||
|
马达Motor (HP) |
1/2 |
1 |
1/2 |
1 |
|||||
|
变频器Inverter |
有Provided |
||||||||
|
矫直滚轮Work Rolls |
上/Upper 9 下/Lower 10 |
||||||||
|
导料滚轮Pinch Rolls |
上/ Upper 下/ Lower |
上/ Upper 3 下/ Lower 3 |
|||||||
|
背压滚轮Back Up Rolls |
N/A无 |
||||||||
|
调整装置Adjustment |
四点独立式 Quatre independent type |
||||||||
|
感应方式Loop Control |
感应台式Touch Sensor |
||||||||
|
开口装置Work Roll Opening |
手动操作Manual Operation |
||||||||
|
驱动方式Drive Method |
侧齿轮方式全滚轮驱动 All Rolls are Driven with Side Gear |
||||||||
规格Specifications
- 特殊规格依客户需求洽商订制
- Any specification available. Custom-made orders welcome