供应FUN-ZONE充气床,充气玩具,植绒床

发布时间 2009-10-08 17:04:55

产品描述

品牌:

按摩充气床

#JL027019N

-放气尺寸:191CM*73CM*20CM(75”*28.5”*8”)

-充气尺寸:198CM*80CM*29CM(76”*32”*10”)

-结构:24个圆拉带

-塑胶材料厚度:0.35MM(14GA)

-植绒厚度:0.55MM(21.2GA)

-床垫下的按摩驱动装置多达6个,让您充分舒缓颈、背、臀部

-可调节按摩的位置和强度

-高质量植绒床面提升您的体感舒适度

-即可用来按摩也可用作床垫

-方便收纳

-12V安全适配电源

-含修补包,彩盒包装

-0.037CBM/3只/箱

         

 

FUN-ZONE 植绒充气床每款产品在出厂均会做静压负荷、动态冲击、熔接牢度(爆破)测试等各项严格测试,只有测试合格的产品才能出厂。图例是做动态冲击测试,测试标准:

将植绒床预先充气至3.7千帕,气床两侧(单人床则是一侧)各居中放置一块120cmX45.7cmX1.9 cm 的木板,木板上面分别放置150Kg砝码,使用马达以5~40转/分钟的速度在气床上方2.5cm处作不间断的压置测试,4500次后没有漏气则判断为通过动态测试。
Inflate each chamber of the mattress to a pressure of 15 in H2O.A sheet of 1.2 m X 45.7 cm X 1.9 cm (4.0 ft X 1.5 ft X 0.75 in) board will be placed & centered on each side of the mattress. Weight totalling 147.4 kg (325 lb) will be distributed on each of the boards. The weighted board will be dropped onto the mattress 4500 times at an appropriate rate of between 5 and 40 cycles per minute constantly maintaining 2.5 cm (1.0 in) above the mattress.At end of test, there will be no leaks.

 

上海吉龙塑胶制品有限公司
联系人 朱越峰
联系电话
地址 上海
进入店铺 在线留言

了解更多

商家产品导航