优质中性硅酮结构密封胶
发布时间 2015-01-06 09:11:42
产品描述
| 耐热性 | -30~164 |
|---|
“M995A”中性结构胶是一种性能优良的结构硅酮密封胶:1）单组分，室温型，使用方便：2）中性固化，不腐蚀大多数基材;
3）粘结性强，强度高，合理的柔韧性和伸长量；4）具有耐臭氧、耐紫外线等抗老化性能;5）耐高低温性能卓越，在-40℃~150℃的范围内保持弹性;6）适合于玻璃,金属建材,石材,混凝土,砖瓦,陶瓷,塑料间的结构性粘结密封.
使用:
1）施工温度在5℃~40℃之间;
2）用两块布法清洁基材;
3）将胶嘴按需要的大小做45°切断;
4）将胶打满接缝处；
5）约30分钟结皮，应在此前进行修整.
重要:
1）使用前请做材料相容性测试;
2）不用于表面温度（45°C）以上的材料;
3）不用于有渗出物的材料；
4）不用于长期潮湿或完全的密闭环境.
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查.
执行标准:GB/T 16776-2005
保质期:9个月（<24℃）
“MEISHI 995A”is a high performance structural silicone sealant:
1）one-component，room temperature，easy to use；2）neutral curing,no
corrosion to the materials;3）excellent adhesion,high
strength,appropriate of flexibility and elongation 4）Is the
excellent performance of heat and cold, Keep elastic between in
low（-45℃） and high（＋150℃） temperatures; 5）Suitable for among
glass,aluminum
material,stone,concrete,brick,ceramic,plastic,structural adhesive
and sealing.
DIRECTIONS:
1）Use of temperature between 5℃~40℃;
2）Substrates should be solvent cleaned using two clothes
method;
3）Cut the nozzle to desired opening at 45°angle ;
4）Fill the joint completely;
5）Formation of skin in 30minutes,carried out dressing
before use.
IMPORTANT:
1）Be compatibility with base material before use;
2）Do not use in structural applications or where surface
temperatures exceed 45℃ ;
3）Should not be used for all Exudation of liquid materials;
4）Should not be use in wet or unventilated and close places.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still indisposed,consult
a doctor.
STANDARDS: GB/T 16776-2005.
DURABILITY: 9 Months（<24℃）.